- Shopping, made easy.
- /
- Get the app!
Sandbaggy 21 Degree Framing Nails (3 inch x 0.113 inch) - Plastic Strip Collated Nails - 1/4" Round Head, Smooth Shank, Vinyl Coated - 12 Gauge (1000)
KWD 20
Sandbaggy FIBC Bulk Bag | 35" L x 35" W x 50 Inch Height | Large Sandbags | Industrial Grade Bag Holds Up to 3000 LBS or 45 Cubic Ft. | FDA Compliant | UV Protected (Pack of 1)
KWD 18.500
Sandbaggy 6 inch Landscape Sod Staples (8 Gauge Steel) | Great for Hard & Rocky Soil | 40% Thicker Than Standard 11 Gauge Staples | Trusted by Farmers & Contractors Across USA (200 Staples)
KWD 16
Sandbaggy #9 x 2-1/2" Exterior Wood Deck Screws - (Torx Head) - T17 Self Drilling Point - Compatible w/Pressure Treated Lumber (3000, #9 x 2-1/2")
KWD 15.500
Sandbaggy Corrugated Brick Wall Tie (1.25" W x 5.5" L) - Buck Anchors - 16 Gauge Steel - Rust Resistant (100, 1.25" x 5.5")
KWD 0
18" x 4 ¾" Standard Snap Ties for Concrete Forms (Short End) - 1" Plastic Cones, Integral Heads - 2:1 Safety Factor, 2,250 lbs Working Load - Construction Grade 4 Gauge Steel (Short End, 100)
KWD 34
Sandbaggy 6" x 1-1/8" Concrete Spreader Cleats - Black Steel - 6" Wall Thickness, 1-1/8" Ends, 80 Count
KWD 16
Sandbaggy 2x4 Metal Fence Brackets for Wood Posts - 2 x 4 Nominal Lumber - Compatible with ACQ Pressure Treated Lumber (Galvanized, 125, Count)
KWD 22.500
Sandbaggy Tie Plate for Wood (1-13/16" x 5") - Hot Dipped Galvanized Steel - 20 Gauge - 13 Nail Holes (Similar to Simpson Strong-Tie TP15) (1.81" x 5", 50)
KWD 8.500
Sandbaggy X Flat Ties for Concrete Forms - 11 Gauge Steel - Compatible with Standard Wedge Bolts - Space and Secure Modular Concrete Forms (0.82" x 14.38", 200)
KWD 13.500
Sandbaggy 1.5" x 36" Steel Angle - 1.5" Angle Steel, 1/8" Thick - Hot Rolled Steel (2, Gray, 1.5" x 36")
KWD 27.500
Sandbaggy 1/2" x 12" Square Steel Key Stock - Exact Dimensions, Clean Cut Ends - Cold Drawn Steel (10, Black, 1/2" W x 12" L)
KWD 19
18" x 8 ¼" Standard Snap Ties for Concrete Forms (Long End) - 1" Plastic Cones, Integral Heads - 2:1 Safety Factor, 2,250 lbs Working Load - 4 Gauge Steel (Long End, 100, Count) - 1 Year Warranty
KWD 0
Sandbaggy Steel Mending Plate for Wood (Hot Dipped Galvanized) - Wood Connectors, Reinforcement, Fasteners (1" x 4", 20, Count)
KWD 0
Sandbaggy 1/4" x 2-3/4" Galvanized Steel Eye Bolt with Hex Nut (Thread Size 1/4-20) - 74 lbs Load Capacity (25, 1/4" x 2-3/4")
KWD 0
Sandbaggy Heavy Duty 3/8" Pencil Rod Clamp - Concrete Formwork Clamps - Cast Malleable Iron - Construction Grade Strength & Safety (45, 3/8 inch)
KWD 30
Sandbaggy 4" x 3" Flat Rectangular Plate Washer (Hot Dipped Galvanized) - 1/2" Inside Diameter - Bearing Plates for Anchor Bolts and Rods (1, 4" x 3" (HDG))
KWD 0
Sandbaggy 6" Structural Timber Screws - Countersunk (Hex Head) - Wood Lock Screws - Roofing, Decking, Framing (1600, 6 inch)
KWD 14.500
Sandbaggy Clear Custom Printed Packing Tape (330 ft Rolls) | Personalized with Brand Logo | Adhesive for Shipping, Office and Storage (4000, Clear, 2 inch x 330 ft)
KWD 575.500
Sandbaggy 3/4" x 3" Coil Tie Bolts - Self-Cleaning Coil Thread - Concrete Formwork, Bridge Deck Forming, Precast Concrete Jobs (25, 3/4" x 3")
KWD 9.500
5/8" Hot Dipped Galvanized Washer – Type A Flat Washer - Sandbaggy (50, 5/8")
KWD 14
Sandbaggy 1/8" x 2" x 2" Flat Square Plate Washer - 5/8" Inside Diameter - 10 Gauge Steel - Bearing Plates for Anchor Bolts and Rods (20, 2" x 2")
KWD 16
Sandbaggy Golf Course Trash Can (9 Gallon) - Green Metal Wire Mesh, Outdoor, Open Top - Fasteners Included (1, Small)
KWD 83
Sandbaggy 2" x 1-1/2" x 1-3/8" Galvanized Angle Bracket (90°) - 18 Gauge Steel - Rust Resistant (2" x 1-1/2" x 1-3/8", 350, Count)
KWD 57.500
Sandbaggy Corrugated Brick Wall Tie (1.25" W x 3.5" L) - Buck Anchors - 16 Gauge Steel - Rust Resistant (Brick Ties, Corrugated, Galvanized Steel, 50, 1.25" x 3.5", CBT)
KWD 13.500
Sandbaggy 21 Degree Framing Nails (3-1/2 inch x 0.131 inch) - Plastic Strip Collated Nails - 1/4" Round Head, Smooth Shank, Vinyl Coated (1000)
KWD 23.500
Sandbaggy Hex Head Bolt - Grade A307 - Galvanized (Zinc Plated) (100, 1/4"-20 x 1")
KWD 15.500
Sandbaggy 3" x 3" Flat Square Plate Washer - 5/8" Inside Diameter - 6 Gauge Steel - Bearing Plates for Anchor Bolts and Rods (100, 5/8" Inner Diameter)
KWD 0
Sandbaggy Jahn A Bracket - Hot Dipped Galvanized (Rust Resistant) - Snap Tie Clamp for Concrete Forms (3.5" x 5" x 4.5", 75)
KWD 16
Sandbaggy 3 inch (10D) Square Cut Masonry Nails for Concrete, Brick, Mortar - 1/2" Wide Flat Heads - Construction, Cement, Brick Walls (200)
KWD 14
Sandbaggy 21 Degree Framing Nails (3 inch x 0.12 inch) - Plastic Strip Collated Nails - 1/4" Round Head, Smooth Shank, Vinyl Coated - 11 Gauge (2000)
KWD 29.500
Sandbaggy 1" Plastic Cap Roofing Nails - Ring Shank, Electro Galvanized - Roof Underlayment, Felt Paper, House Wrap, Tar Paper (100)
KWD 9
