Connect your external water cooling components elegantly and easily to PC internal cooling components without sacrificing high flow and large diameter hoses. The Panama HF 38 offers the lossless maintenance of large hose diameter gauges thanks to the use of G 3/8 inch internal threads and a special internal geometry, which is normally not possible due to the specified slot dimensions. You have the possibility, for example, to install/connect external radiators, pumps, chillers etc. with full flow without drilling. Likewise, no new PC housing is required that already offers hose feedthroughs, but may not quite suit your taste. The Panama HF 38 consists of three parts requires no tools for installation. First, attach the slot bracket as you also install a graphics card. The inner part is then firmly screwed to the outer part and sealed internally with two O-rings. Use G 3/8 inch connectors of your choice. Adjacent neighbouring slots are not hindered. However, we usually recommend the lowest free slot so that the hoses can be laid easily. If you do not want to use G 3/8 inch geinde connectors, extra flat adapter pieces are also included with which you can also use G 1/4 inch connections. By using the Panama HF 38, you not only get an elegant solution