Hand-made personalized stick module PACK compatible with Victrix Pro BFG controller, and a T2.0 screwdriver was included.
No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.
Improve module issues such as drift by replacing existing module.
Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module.【Attention : 】please insert and remove connector pins of left stick module slowly.
Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
【Note】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required.
Epindon ASTRO C40 TR Controller Stick Modules FPS Tension Module (170g，NEW)
KWD 11
Epindon Thrustmaster eSwap S/S & Pro Controller Standard Tension Replacement Stick Module Kit with Target Rings (PS4,PC)
KWD 11
Hall Effect Replacement Stick Module for Astro C40 TR Controller (80G)
KWD 11.500
-24%
Gammeefy JC202 Switch controller
KWD 14
