IP Extender Over Coax Kit, BNC UTP to 10/100Base-TX LAN Port Ethernet Extender Set Over Coaxial Cable (EoC) for IP Security CCTV Cameras,Up to 1640FT (POE300)
☆☆☆☆☆ Network port 1 10/100Base TX Ethernet port.Indicator LED PWR: The red LED product remains on when powered normally.PLC: The green LED carrier signal communication duration is on.LAN: The yellow LED flashes during network communication.LAN: The green LED product flashes during communication during operation.
☆☆☆☆☆ Power interface DC5-12V input,Supports DC5-12V output and DC12V input,Supports 9-60V input,Supports 9-60V output,POE power supply 48-57V
☆☆☆☆☆ Transmission medium: 75-5 or above coaxial cable or Cat5e/6 Ethernet cable. One to one to many networking (grouped) master-slave pairing. Transmission bandwidth RVV 2 × 0.75 square millimeters, 100 meter. parallel cable, impedance 6 ohms under test conditions, 65Mbps.Signal interruption self recovery ≤ 5 seconds
☆☆☆☆☆ Ideal for Security Video Systems, Video Switching system, Home Automation, Multi-media , Education systems, Access Control system, Information Diffusion system, etc;
☆☆☆☆☆ IP interface:RJ-45(568A/568B),Power Jack:DC-12V input(12V DC adaptor not included),Coaxial interface:BNC-F,as the product image show;
☆☆☆☆☆ Exquisite and Low power consumption.Carefully Read Before Using Manual,also refer to the product images.
☆☆☆☆☆ Package content: 1xBNC UTP to 10/100Base-TX LAN Port IP Extender Over Coax, 1x Manual
☆☆☆☆☆ Special reminder: The product image shows the front and rear interface surfaces of a device, and the packaging contains one device, not two devices. To avoid misunderstandings, this explanation is provided here!