Product Description

Details

3 Pins: Its 3 independently adjustable pins fit into the countersunk holes of the soft jaws, allowing for even pressure on each pin and eliminating jaw lift.

1. First put the chuck on the lathe (not included), then fix the raw jaws in the correct position of the chuck to clamp the workpiece (not included), move the T-block in the middle of the jaws (not included), the T-block (not included) cannot exceed the outer edge of the chuck.

2. The middle of the jaw trimmer has three screws, the three screws slide to the concentric position.

3. The two screws of the jaw trimmer at the same time set into the inner hole of the chuck, and then move the claw to the three screw holes, while stuck to the raw claw between.

4. Let the chuck grip the jaw trimmer (the role is to remove the gap).

5. Cutting and machining to the required size.

6. Loosen the chuck and remove the jaw trimmer.

7. If these steps are done correctly, the corrected raw jaws will be highly accurate.
Specification

Size: 4-15 Inch

Color: Silver.

Item Model Number: 3 Jaw.

Compatible Devices: Lathe(Not Included).

Material: 42crmo Alloy Steel ;

Hardness: 45-55HRC

Precision of Claw Trimmer Body: 0.005

Process: High-temperature Quenching and Tempering, CNC High-precision Machining, Grinding, Blackening Treatment

Package Included

1 * Hydraulic Three Jaw Chuck