Filter, Regulator & Lubricator Combos
Installation instructions:
1. Press the arrow to confirm the direction of the inlet and outlet during installation. The drain must be kept in the vertical direction (the valve body letter is positive), and it can be used after installation without power supply.
2. If the water volume is particularly large, loosen the regulating valve counterclockwise to increase the water volume, and then tighten the nut after adjustment.
3. If there is no drainage, loosen the regulating valve counterclockwise to let the air pressure flush out the dirt and then tighten the regulating valve.
4. If the environment is too dirty, you need to clean the filter regularly. Steps for cleaning the filter:
1) First close the inlet valve to confirm that there is no pressure inside
2) Unscrew the top cover, take out the top cover filter for cleaning, and lock the top cover when you put it back on
3) Unscrew the lower cover, take out the filter screen of the lower cover, clean it, and then put it back in sequence
5. The drain outlet is connected back to 8 pipes to lead to the sewage pipe, or the drain outlet joint can be removed and 1/2 pipe can be used to enter the sewage system.
==========
Hign-concerned Chemical : None
Type : Actuator
Model Number : DN40-300
Origin : Mainland China
Certification : none