Search

Search

Home / WQAPVHBG / Sensors
Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter in Kuwait

Current Transformer Split Core, PZCT-02 Current Sensor, 100mA Enclosed Split Core Ac Sensor with 16mm Inner Diameter and 10Ω Resistive Properties for 100 mA Energy Meter

KWD 5
Brand
WQAPVHBG
Category
Sensors
Weight
59 g
– 1 +

Special Features

  • Product Spec: Current transformer has 1 pcs, model: PZKHCT, working frequency: 50Hz to 60Hz, insulation resistive properties: 1000MΩ, resistive properties: 10Ω, measurement range: 0-100A, dielectric strength: frequency 1000V/1 min
  • Snap on Structure: Current sensor inner hole diameter is 16mm, and the accuracy is 0.5 level. Enclosed split-core ac sensor adopts snap on structure and can be directly fixed to the cable with nylon tie, so you can easily install
  • Instructions Using: Current transformer split core can be used for electric energy meters with AC 220V and 380V power supplies.When installing energy meter, it is no need to cut off power supply when using current transformer (ct)
  • Note: The CT primary should be connected in series with test current loop, and split core voltage transducer secondary should work in short-circuit state. The secondary circuit cannot be open circuit, avoiding install fusible link
  • Multifunctional: Current transmitter is not only an accessory tool for 100A electric energy meter, split core current transformer coil sensor can also provide support for home appliances, electric vehicles, wind power generation

Description

Features:
This is a mini split base current transformer; it's the smallest one compared to the similar products (output 100MA).
The diameter of inner hole is 16mm, the accuracy is 0.5 grade,
Using snap joint structure, it can be fixed to the cable directly through nylon ties.
Built-in input coil; small and light, easy to install.
Fully enclosed, good mechanical properties and environmental , strong voltage isolation capability, safety and reliability.

Specifications:
Model: PZKHCT
Environment temperature: -40℃~+85℃
Relative humidity: 90%(40℃)
Working frequency: 50Hz~60Hz
Insulation endurance grade: B grade (130℃)
Insulation : >1000MΩ normally
Dielectric strength: can afford power frequency 1000V/1minute
Flame : Conform to UL94-Vo grade
Internal : 10Ω
Measuring range: 0-100A
Weight:59g

Application:
1. The current transformer is used for energy meter in special; AC 220v, 380v power supply can both be applied.
2. When you fix the energy meter, you don't need to cut off the power if you use this product.

Package Included:
1 x Current Transformer

Note:
1. The CT primary should be connected in series with the test current loop, the secondary should be as work in the short-circuit state.
2. The secondary circuit is not allowed open circuit, so please do not install .

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}