Search

Search

Home / DONGSE / Cutting Tools
face milling Milling Cutters for Wood 1/2 Shank Facing Mill Insert Carbide Slab Spoilboard Surfacing Router Bit 3 Flute Wood Planer Bit(1l2x60x80Lx3T) in Kuwait face milling Milling Cutters for Wood 1/2 Shank Facing Mill Insert Carbide Slab Spoilboard Surfacing Router Bit 3 Flute Wood Planer Bit(1l2x60x80Lx3T) in Kuwait face milling Milling Cutters for Wood 1/2 Shank Facing Mill Insert Carbide Slab Spoilboard Surfacing Router Bit 3 Flute Wood Planer Bit(1l2x60x80Lx3T) in Kuwait

face milling Milling Cutters for Wood 1/2 Shank Facing Mill Insert Carbide Slab Spoilboard Surfacing Router Bit 3 Flute Wood Planer Bit(1l2x60x80Lx3T)

KWD 33
Brand
DONGSE
Category
Cutting Tools
Weight
0.7 kg
Size1l2x60x80Lx3T
– 1 +

Special Features

  • The milling cuttering disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutters, and the downward force is small, and the product is not easy to deform when milling thin strip products.
  • Hardening and hardening shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cuttering head.
  • The cuttering body of the milling cutters is your savior for the main shaft, allowing you to reduce the load on the processing of the load.
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the position groove and the closely fit together, the rigidity is enhanced, and the processing effect is good.
  • High-hardness treatment Strong, the surface of the cuttering head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.

Description

For Wood 1/2 Shank Face Milling Insert Carbide Slab Spoilboard Surfacing Router Bit 3 Flute Wood Planer Bit
Specification:
Type: Abandonment type Cleaning
Head size:
60mm( Outside diameter)*H80( Total length)*3T(Three rows of teeth )*1/2(Shank diameter)
76mm(3 inch)( Outside diameter)*H75( Total length)*4T(Three rows of teeth )*1/2(Shank diameter)
Insert: 12x12x2.2mm
Processed sheet: Apply to Solid Wood,Plauwood,Density Plate,Mahogany boar,Ecological Board, Acrylic Plate,Plastics and so on.
Applicable Machinery: End Mill, Trimming machine,Wood Planer, Engraving machine, Hanging machine,Bakelite milling ,Cutting machine
Purpose:Cutting stock,Trimming ,Milling plane
Note:
Item color displayed in photos may be showing slightly different on your computer since monitors are not calibrated same.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}