Heavy Drain Snake for Outdoor.The sewer tool is used for dredging sewers,drainage wells,large-diameter pipes,chimneys,etc.Its length is 15 meters (49.2 feet),width is 25mm (1 inch),thickness is 2.5mm (0.1 inch),and the diameter of the punch is about 4cm (1.6inch).The total weight of the sewer snake tape tool is 8.9kg(19.6 LB).
The sewer snake tool is made of manganese steel.It has high hardness,high wear resistance,good toughness and impact resistance.It can be used in very bad working conditionssuitable for outdoor,such as sewage pipes, drains, chimneys, cesspits etc.
The flat tape of the sewer tool is polished,with good surface roughness.There is a steel punch at the head, a ball handle at the end, and a sliding handle in the middle.For storage purposes, an iron stand with zise of 64cm (25.2inch) is provided.
Note:it is a manual heavy duty plumbing snake tool,2.5cm(1 inch) in width and 2.5mm/0.1inch in thickness,that has a strong bending stiffness. So it is difficult to be bent in tight spaces,and if it is used to clear a blockage at the elbow of a thin pipe,it may not be suitable.So please ensure that the inner diameter of your pipe is larger than the diameter of the punch and there is enough space around it.
This is a heavy duty drain unblocking tool,about 8.9kg, it is very hard. So it is recommended to use it outdoor and it should be used by two people wearing gloves.And as a professional tool, it is very suitable for Plumbers.