Bearings
Description
Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial loads.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Stainless steel bearing features stronger rust and corrosion resistance ability.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, and so on
Selection Guide
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification
Model: S698-2RS
Shield Type: Double Sealed
Inner Race/Outer Race Material: 440C Stainless Steel (9Cr18)
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 19mm
Thickness (B): 6mm
Dynamic Load Rating (Cr): 1.7 KN
Static Load Rating (Cor): 0.66 KN
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 4 Pcs
Material : Stamping Steel
Model Number : Double Sealed Bearings