【Singlemode Multi-functional Mini OTDR with APC Interface】This OTDR fiber optic tester has functions such as auto OTDR, expert OTDR, event map, OPM, VFL, power adjustable stable fiber optic light source, optical loss test, RJ45 cable tracer, cable length test/sequence collation, etc. It is used for optical cable construction, installation and maintenance, locating fiber faults, measuring fiber length, testing insertion loss of optical passive components, tracing cable, etc.
【Pro OTDR】Test wavelength 1310nm/1550nm, dynamic range 26dB/24dB, maximum test distance 100km, test unit km/kft/mi, event dead zone 2.5m, attenuation dead zone 8m. This fiber optic tester adopts an intuitive and user-friendly UI design. It has a 4.3 inch 800 x 480 resolution multi-touch LCD capacitive screen. With a large-capacity polymer lithium battery, it can test continuously for 12 hours and standby for 20 hours. The LED flashlight help you to work at night or in dark environment.
【Main Functions】Auto OTDR: Only need to set wavelength and average time; Expert OTDR: Need to set wavelength, test range, pulse width, etc. Event Map: Graphically display fiber link length, connector type, breakpoint location, etc. Support simultaneous display of curve/list/map. OPM: Support CW/270/330/1k/2kHz frequency identification; VFL: Maximum test distance 10km; LS: Support CW/modulation mode output, adjustable output power; RJ45 Cable Tester: Maximum test distance 300m.
【File Storage and Processing】This optical time domain reflectometer has a built-in 8G TF memory card that can store 200,000 curves. SOR and PDF formats are supported. You can take screenshots to save data. Data and files can be uploaded to computer through the USB interface, and analyzed, processed or printed through the OTDR analysis software. Please note: There is analysis software in the TF card that needs to be installed on the computer.
【Pre-purchase Tips】1) Light testing is not supported; 2) Need additional accessories to use the end face detection; 3) Cannot test splitters. To test splitters, the dynamic range should exceed 42dB. 4) Before testing or if the test result is inaccurate, please clean the connector end face with alcohol pad. 5) Please make sure you are a professional before ordering. This fiber tester has been strictly tested before leaving the factory and will not fail to be used.
Cable Tracer Ethernet Network Cable Tester RJ45 RJ11 - Wire Toner Tracker CAT5 CAT6 Continuity Tester - Tone Generator and Probe Kit Telephone Line Circuit Finder Locator Detector Tool - Red
KWD 7.500
Cable Finder Circuit Tester, Cable Finder Tone Generator Probe Circuit Breaker Finder, Tone Generator and Probe kit with RJ11 Plug, Circuit Continuity Tester, Network Telephone Line, Electric Wire
KWD 6.500
Moocci 3 Pcs Visual Fault Locator Fiber Optic Tester - VFL Fiber Optic Cable Tester Meter with FC to LC Adapter - Fiber Optic Tools Kit for FC/SC/ST/LC Connector,Network Cable Test -Green Purple Black
KWD 17.500
Moocci Fiber Visual Fault Locator - VFL Fiber Optic Cable Tester Meter Kit with FC Male to LC Female Adapter - Fiber Optic Tools Source Tester Detector for LC/FC/SC/ST, Network Cable Test
KWD 8
