Search

Search

Home / Forctesmin / Motion, Speed & Force
Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm) in Kuwait

Dynamic Torque Sensor with OLED dispaly Non-contact Digital Torque tester Rotation speed sensor, Motor speed measuring instrument (1Nm)

KWD 229.500
– 1 +

Special Features

  • This torque sensor can be measured torque and rotation speed which can be displayed on OLED display in real time.
  • Users can perform simple calibration, zeroing, filtering and other operations.
  • Power value can also be calculated and displayed on OLED
  • Accuracy: 1/1000 or higher, reliable zero-point
  • Supports RS485 communication, supports active upload protocol, and the communication rate can reach up to 1000 times/second
  • The Rotation speed can directly output frequency signal, the maximum speed range is 15000RPM
  • Allow sensor overload 200%
  • Non-contact, Maintenance-free, no vulnerable components.

Description

This sensor supports current and voltage output.

If a 120-line code disk is used, the acquisition speed is 25 times per second at a rotation speed of 12.5RPM or above.

Measurement performance: 24-bit AD acquisition chip, acquisition speed 1200 times/second.

Torque value display range -99999-99999, speed value display range 0-99999.

Communication: 485 communication port can execute Modbus-RTU protocol ASCII active upload HEX active upload protocol.

Transmission: 4-20mA, 0-10V (optional)

Button: 3 independent key operations.

Power supply: DC 24V (±10%), 0.2A. Maximum voltage 27.5V, minimum starting voltage 12V.

Speed ​​output: The output of the shaft body rotates one circle, and the output can be selected as 2000-line encoder or 120, 60 pulses.

Working environment: Ambient temperature: -20-70℃; Relative humidity: ≤85%RH; Avoid strong corrosive gases

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}