Temperature Control Thermostat ITC1000 – Dual Stage Digital Temperature Switch Controller °C °F Display Hot and Cold Relay NTC Sensor, 3D Printer Freezer Refrigerator Incubator 110 Volts
2 relay outputs: set the target temperature and return the temperature difference to maintain a specific temperature range mode, safe and energy-saving. Accuracy: ±1°C, Temperature Control Range: 10~100°C, Power Consumption: ≤3W, Power Supply: 110VAC 50Hz/60Hz. Output: 2 relays, cooling (10A/110-220VAC)/heating (10A/110-220VAC). Switch between cooling and heating modes
1m Waterproof Probe: Smart Constant Temperature Controller 110V can be used in humid and water environment, can be used for home brewing, fermentation, refrigerator, water tank, hatching, seedling hot pad, accelerated germination, pet breeding, etc.
Intelligent control: This incubator thermostat AC110V supports temperature calibration, compressor delay protection, alarm when the temperature exceeds the preset high or low temperature or sensor error, and saves all parameter settings after restart. There is no direct voltage output, and you need to connect an additional power supply to the load.
Free switching between hot and cold: no need to change the line between heater and cooler frequently, this thermostat has 2 relays and you can connect 2 appliances (heater and cooler) at the same time.
Temperature Calibration and Protection: Temperature Accuracy Calibration; Optional refrigeration control outputs delay protection while displaying Fahrenheit or Celsius readings switchable
1/2" NPT Stainless Steel 304 100mm Thermowell for Homebrewing
KWD 5
Sensaphone 1800 Monitoring System
KWD 368.500
Vee Gee 83110-12 Digital Thermometer, Ultra-High Accuracy, -10 to 100 Degree C/14 to 212 Degree F, 1.4" x 0.7" Face, 5" Stem, 0.1 Degree C/0.1 Degree F Resolution
KWD 18
6" Straight Brass Well Thermometer (40°F - 280°F)
KWD 16
