Rows: There are single row chains and multi row chains, such as double row chains, triple row chains, etc. Multi row chains are equivalent to several single row chains connected by long pin shafts, and their load-bearing capacity is proportional to the number of rows. However, if the number of rows is too difficult to make each row evenly stressed, double row chains and three row chains are commonly used.
Installation: During installation, it is necessary to ensure the accuracy of the fit between the sprocket and the chain. The axis of the sprocket should be parallel to each other, and the chain should maintain appropriate tension. If the tension is too loose, the chain is prone to jumping teeth or detachment; If the tension is too tight, it will increase the wear of the chain and sprocket.
High transmission efficiency: Compared with belt transmission, roller chain transmission has no elastic sliding and can maintain accurate average transmission ratio, resulting in higher transmission efficiency.
Strong load-bearing capacity: capable of withstanding large loads, suitable for high-power transmission scenarios. However, the specific load-bearing capacity depends on factors such as the specifications and materials of the chain.
Good adaptability to working environment: able to work in harsh environmental conditions such as high temperature and dust, with stable and reliable performance. But in humid and corrosive environments, corresponding protective measures need to be taken, such as selecting corrosion-resistant materials or surface treatment.
Application scenarios: Roller chains are widely used in household, industrial, and agricultural machinery, including conveyors, drawing machines, printing machines, automobiles, motorcycles, and bicycles.
TA-VIGOR 10mm to 14mm Flexible Coupling D32xL40 Clamp Tight Motor Shaft 2 Diaphragm Shaft Coupling Joint Connector
KWD 5.500
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements -M8 (LH and RH))
KWD 5
Climax Part ISCC-037-037 Mild Steel, Black Oxide Plating Clamping Coupling, 3/8 inch X 3/8 inch bore, 7/8 inch OD, 1 3/8 inch Length, 6-32 x 3/8 Clamp Screw
KWD 19
Front Upper Ball Joints Sway Bar End Links Inner Outer Tie Rod Ends for Ford Fusion 2006-2010,for Lincoln MKZ 2007-2009,for Lincoln Zephyr 2006,for Mercury Milan 2006-2009 K500013 K80251 K80250
KWD 16.500
