Slotting Cutter Arbors
1X 0.8KW ER11 water-cooled 65mm metal spindle 400Hz poles = 2 diameter = 65mm
Size: 65x267mm (midbody diameter: 65mmxlength: 267mm)
Speed regulation method: Through the three-phase inverter output, adjust the inverter frequency to change the spindle speed.
Cooling method: water cooling

Power: 0.8kw
Voltage: 220V
Current: 3.6A
Frequency: 400Hz
Speed: 24000rpm
- Poles: 2
Runout: less than 0.01mm
Diameter(mm): 65
Bearing type: 2 x 7002 P4 DT and 2 x 7000 P4 DT
4 ceramic ball bearings fully sealed angular contact bearings
Chuck ER11
Clamping knife diameter 13mm12mm12.7mm,11mm,10mm,9mm,8mm,7mm, 6.35mm,6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Water-cooled ER11 chuck block