Specification:
Item Type: Pneumatic Air Drill
Model: YDE 3954C
Material: Zinc Alloy
Collet Size: 3/8in (10mm)
No Load Speed: 2500rpm
Collet Thread: 3/8in 24UNF
Air Pressure: 90psi (6.3kg/cm²)
Air Consumption: 4.0cfm
Air Inlet: 1/4in
Overall Length: Approx. 215mm / 8.5in

Package List:
1 x Host
1 x Wrench
1 x Intake Port

Note:
Suggestion:
1. Before and after use every day, please inject 2‑3CC of #60 pneumatic lubricating oil (sewing machine oil) from the air inlet
2. Let the machine idle for a few seconds after filling with oil
3. Generally, the air source compressed by the traditional air compressor contains water, and the lubricating oil in the air compressor brought out by the aircompressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause wind If the blade is stuck, once the tool is started, the blade will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.