1PC Intelligent Universal Temperature Transmitter Signal Isolator and Distributor PT100/TC/V/mV/mA to 4-20mA converter
Functions And Features:
Integrated intelligent temperature transmitter, isolator and distributor.
Isolation of the four "input-output1-output2-power".
Software nonlinear correction, high linearity conversion of input and output.
The software is self-stabilizing to eliminate errors caused by temperature drift and time drift.
The user can set the signal range and signal type through the programmer.
Can be intensively installed.
Note1. (Sn1): Set the corresponding code according to the sensor model.
Note2. (PvL1): Set the zero point value of the first transmission output.
Note3. (PvH1): Set the full point value of the first transmission output.
Note4. (PB1):Used to fine-tune the output zero point.
Note5. (K1):Used to fine-tune the output full point.
Note6. (out1):
The first transmission output type,3 output types can be set:
When out1=1, it is0~10mA or0~2.5V transmission output.
When out1=2, it is4~20mA or1~5V transmission output.
When out1=3, it is0~20mA or0~5V transmission output.
Note7.(InL1) (InH1): Set the minimum and maximum values of the first non-standard input signal only when Sn=16 or 17 millivolt signal or resistance signal input, it needs to be set. With remote transmission pressure gauge0~375Q input
Set as an example: InL1=0,InH1=375
Note9.The second parameter setting is exactly the same as the first parameter setting
Note10. (A--B):
Channel selection:
A--B=0 means two in and two out,
DualA--B=1 means one input and two output single type.
Specifications:
Structure: Small card structure.
Connection: 5mm terminal.
Terminal screw material: Nickel plating on iron.
(Screw allowable torque is less than 0.8N .m)
Case material: Flame Resistant Resin
Isolated: Channel insulation(between input-output-power supply)