1.Preparation: Open the door of sterilizer and fill 0.6 liters of distilled water into the tank. please watch the water flow out at the water level mark.
2.Load the objects in instrument plate. covering the cover then open the exhaust holes of the plate, close the door.Plug in the power cord.
3.Set the pressure 0.07~0.2 (10-30Psi), related temperature 115~134℃(239-274℉)
4.Turn on the power switch, the lamps of power be lighten, the machine enter the standby state. Buzzer alarm means you can pmutekey sterilizing time.
5. Set the time according to need. The range is 0-60min. Then the buzzer alarm stop, HEATING be lighten, start to heating automatically.
6.When it reached pmutekey sterilizing time, and the back timing end, the heating will be cut automatically, the light blanking, meanwhile the buzzer alarm. Means the sterilizing end. This time please turn off the switch of the circuit breaker.
7.For safety,please make sure to open the release valve of rotary steam first. (To spin off against the clock) steam and water. waiting the pressure gauge until the pointer is zero .
Single Tube Gas Bunsen Burner,Liquid Propane for Lab Heating Equipment JT-45 (Deep blue)
KWD 5.500
Multi-Functional Horizontal Electrophoresis Tank, 120×120mm Large Gel, 700mL Buffer Volume Electrophoresis System for Lab Biology
KWD 87
Heating Heater 25mm Inner Diameter 25x25/25x30/25x40mm Height Electric Heating Element for Injection Machinery(90W 25x25mm)
KWD 19.500
Pyrex Color-Coded Mohr Pipet, 2 mL, with 0.1 mL Graduated Interval
KWD 7
