Search

Search

Home / GENVQdf / Cutting Tools
T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D20) in Kuwait T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D20) in Kuwait T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D20) in Kuwait T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D20) in Kuwait T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D20) in Kuwait

T-Slot Milling Radius Corner T Type End Mill Machining Carbide Tool D3mm-D20mm 1pcs(D3xR0.5x1Hx50L)

KWD 14
Brand
GENVQdf
Category
Cutting Tools
Weight
50 g
SizeD3xR0.5x1Hx50L
– 1 +

Special Features

  • Features - Sharp cutting edge provides smooth cutting, not easy to break. coating provides excellent , greatly improves wear resistance and hardness, and reduces the coefficient of friction.
  • Material - The T-slot milling has has high hardness , good toughness, wear resistance, bending resistance and heat resistance. With good milling and cutting performance, carbide can run at higher speed than other substrates.
  • Notes - Used on machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling . Add cutting to protect the cutting edge and make the cutting smoother when working.
  • Applications - Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling and cutting stainless steel, cast iron, tool steel, alloy steel, copper, aluminum, composite materials, etc.
  • Used on machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.

Description

Thickness: 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mmFillet: R0.5, R0.75, R1, R1.5, R2, R2.5, R3, R4, R5Applicable to: machining centers, milling machines, engraving machines, precision engraving machines, etc.Material: aluminum, copper, materials within HRC60.No coating is suitable for machining copper and aluminum.feature:1. tungsten steel material2. Wear-resistant and not easy to stick to the milling cutters3. High chip removal efficiency4. Fast processing speed and high finish5. Strong continuous processing and not easy to break6. The bottom has a chamfer design, easy to install

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}