Rotary Shafts
1X 2.2KW ER20 water-cooled 80mm metal spindle 400Hz/800Hz poles = 4
Diameter = 80mm
1X 2.2KW BD600 VFD
1X 75W water pump
1x 80mm spindle bracket
Size: 80x247mm (midbody diameter: 80mmx length: 247mm)
Speed regulation method: Through the three-phase inverter output, adjust the inverter frequency to change the spindle speed.
Cooling method: water cooling
Power: 2.2kw
Voltage: 220V
Current: 10A
Frequency: 800Hz
Speed: 12000-24000rpm
- Poles: 4
Runout: less than 0.01mm
Diameter(mm):80
Bearing type: 2 x 7005 P4 DT and 2 x 7003 P4 DT
4 ceramic ball bearings fully sealed angular contact bearings
Chuck ER20
Clamping knife diameter: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Water-cooled ER20 chuck block
Input voltage: 220V (+/-15%)
Input frequency: 50/60Hz
Input phase: single phase or three phase
Output voltage: 220vAC
Output frequency: 0-1000Hz
Output current: 10A
Output phase: 3 phases