The board is a high - power MOS trigger switch driver module and control board. It uses field - effect tubes to adjust the electronic switch. By adopting a double - MOS parallel active output design, it features lower internal resistance, larger current, and higher power.
Under normal temperature, it can operate at 15A and 400W, which meets the usage requirements of most devices and enables easy control of high - power devices. Moreover, it can be applied to high - power devices that can be controlled via the output terminal, such as electric motors and light bulbs, to control the motor speed and the brightness of the bulbs.
Certainly, it can also be used for devices that require PWM input for control, including LED light belts, DC motors, micro - pumps, and solenoid valves.
Technical Specifications:
Operating Voltage: DC 5V - 36V
The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support
Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W, Enhance cooling conditions, the maximum current up to 30A
Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc., can input PWM, control motor speed, lamp brightness and so on
Operating temperature: -40-85 ℃
Dimension: 34mm x 17mm x 12mm/ 1.34×0.67×0.47 inch(L × W × H)

Package includes:
10 X MOS FET Trigger Switch Drive Module