When you need to fill holes, whether it's from rust or because you want a smooth look and you're removing door locks or an antenna, this kit from Eastwood makes it easy! It includes everything you need to fill 30 holes and we even include a step drill bit so you can precisely drill the correct size hole so you get the best fit with the least amount of body work. The kit includes three sizes of 18 gauge plugs to allow you to fill various sizes of holes. The step drill bit and plugs are designed for a precise fit. Simply drill the hole to the size plug you will be using for a perfect fit.
Kit Includes:
(10) Ø0.75" Steel Plug
(10) Ø1.00" Steel Plug
(10) Ø1.375" Steel Plug
(1) Step Drill Bit
(1) Plastic Case with Foam Insert
(1) Eastwood Instruction Manual
Filling rust holes or smoothing and hiding door locks and antenna holes has never been easier. Simply follow these steps:
Step 1: Determine the center point of the patch and mark the center with punch.
Step 2: Drill the hole to desired size using the smallest patch needed to fill the hole.
Step 3: Place the patch in the hole. TIP: Use Eastwood Stitch Weld Magnets (item 20421) to hold the patch flush with the existing sheet metal.
Step 4: Slowly weld the patch into place using small stitch welds in alternating locations while allowing time for the metal to cool between welds.