Application
It can measure many parts such as the vehicle chassis, doors, windows, trunk, engine compartment, wheelbase.
How to Use
1.When measuring small dimensions up to 35.43in, a drawing-measuring ruler is not required. Use the slide rule according to the position of the distance measuring point.
2.The level (level in the level display) displays the measured value. Read the measurement reading on the slider.
3.When measuring dimensions of approx. 70.87in, use the stretched inner bar and measure according to the level displayed on the level meter. The measurement reading is read on the slider holder. Smoothly pull the scale (at the level shown on the level meter) during the measurement.
4.The vertical scale is located directly at the point of measurement, is adjustable up and down, and is screwed in the vertical position to maintain the level (at the level shown on the level meter).
Specifications
Material: Aviation Aluminum
Process: Electrophoresis
Assembly Required: Yes
Measurement Error: ±1mm/0.04in
Measurement Range:
X-axis: 200~2250mm/7.87~88.58in
Y-axis: 20~150mm (or 340 mm)/0.79~5.91in(or 13.39in)
Z-axis: 20~150mm (or 340 mm)/0.79~5.91in(or 13.39in)
Scale Length: 95cm/37.4in; 38cm/14.96in; 17cm/6.69in
Net Weight: 3.5kg/7.72lbs
Package Included
1Set * High-precision 2D Measuring Ruler System
1* CD
Notes
1.Please note that this product is made of aluminum and should be handled with care when in use.
2.Please do not come into contact with fire, rubber water, asphalt, and other corrosive substances. In case of inadvertent contact with paint and other liquids, please rinse it off immediately with a small amount of water and wipe the measuring tape clean.
3.Please note that the magnetic probe of this product will tilt after use, please do not pull it out vertically to avoid injury.