Specification:
Material: Circuit Board, Electronic Component
Voltage: 3.3-5V
Size: app.3.6 x 2.6cm/1.42 x 1.02in
Color: Purple
The I2S stereo DAC breakout cable matches perfectly with any I2S output audio interface.
3.3 - 5V and can be used to handle many different formats by setting both pins high or low.
And DAC can process data immediately, and give you a clear, analog, stereo line level output.

It's even cool with for MCLK-less I2S interfaces such as for the Raspberry Pi (which it's ideal for), a built in PLL will generate the proper clock from the incoming signal.
For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data.
And you can set it up to take an input system/master clock, but we default-set it to just generate it for you.
So you only need to connect Data In, Word Select (Left/Right Clock) and Bit Clock lines. If you want, there's a mute pin and a de-emphasis filter you can turn on.
Package includes:
2 x Decoder Module
2 x Pin Header