Product Description:
Organic silicone potting glue 1:1: Two-component glue (component A and component B) is mixed in a 1:1 ratio. It forms an elastomer after curing and is commonly used for packaging protection in the fields of electronics, electrical appliances, new energy, etc.
How To Use:
1. Use an electronic scale to accurately weigh the AB glue at a weight ratio of 1:1 (please fully stir the A glue before weighing) to ensure that the resin on the container wall and bottom is fully stirred.
2. Mix the weighed A glue and B glue and stir them evenly. Pour the mixed glue A and glue B into the object to be poured. Generally, it takes 2 hours for the initial curing, and usually takes 24 to 48 hours to fully cure.
3. If the sealed product is too large, it is recommended to seal in stages and then cure at room temperature or heat.
Feature:
Strong bonding and sealing：Good waterproof and aging resistance, can be used for potting underwater connectors, aquarium water pumps and other devices.
Repairability:The sealed components can be taken out for repair and replacement and then repaired with this potting glue without leaving any traces.
Common Application Scenarios:
Electronic components: Waterproof and moisture-proof packaging of PCB boards, sensors, and power modules.
LED: Potting of driving power supplies and light strips to improve weather resistance.
Automotive electronics: Sealing and shockproofing of ECUs and wiring harness connectors.
Note:
1. Operate in a ventilated environment.
2. This product not used for a long time, there will be stratification or sedimentation. Stir A glue evenly when using it. Then mix it according to the weight ratio of 1:1 (note that it is not the volume ratio)
3. The more glue is mixed together, the faster the glue cures. Please pay attention to control the amount of glue mixed at one time.
4.Keep away from children to avoid accidental ingestion.