You can measure and tape the template in place if needed.  1. Align template and emblem exactly where you will be installing it.  2. Then remove the emblem backing and expose the adhesive and then you can press the emblem in place by pushing each letter one at a time on the face of the template.  3. Now after installing and sticking the emblem all the adhesive to set up for at least 1 minute.  4. Now the trick to removing the template is to start at one side and gently lift the template and push each letter through one at a time, since the alignment templates are an exact fit.  5. You will follow the same process for each letter in step 4 until you have successfully removed the template for a perfect fit.  6. Congratulations as you now have the very best looking Emblems available.