HPDMC Tire Change Tool/ Pneumatic Bead Breaker / Car Bead Breaker for Car, Truck, Tractor, Mower, ATV, RV, Golf Cart etc.
"5 in. stroke. No need for hydraulic pump. Pneumatic Bead Breaker is universal and works on a wide variety of tire and wheel combination's from lawnmower up to tractor tires. This handheld bead breaker works on most single and 3-piece wheels. Operates with air impact or battery impact wrench and/or air ratchet wrench. No hydraulic pump is needed to operate this tool and no need to remove wheel to break the bead.
Step 1: Choose either an air impact or air ratchet. An air ratchet is preferred for hard to reach areas
Step 2: Insert the Impact tool counter-clockwise onto the grapple hook drive bolt and begin to Impact the tool into position, use the handle to guide the wedged feet between the rim edge and tire bead.
Step 3: Impact the drive bolt until the tool is in an upright position and the wedge feet are secured between the bead and rim.
Step 4: Impact the wedge foot drive bolt counter-clockwise until it strips the tire bead free of the rim.
Step 5: Retract foot by reversing impact on wedge foot, then retract grapple hook by reversing drive bolt, finally, remove tool from rim.