Fuel Cell Rear End Breather Filter Assembly with #6 6AN -6 female fitting (filter color may vary). This filter media measures minimum 2" outside diameter and 1-1/2" tall. The overall height of this assembly is about 3-1/2" . The filter inlet is equipped with a black annodized aluminum 6AN female connection fitting. This racing filter assembly has possible uses a fuel cell vent, rear end vent and crank case breather. This item will not prevent spills, leaks, or overflow conditions. Caution should be used. This item is similar to Wehrs filters assemblies. The color and size of the filter element may vary and may not appear eactly as shown the images presented. This product is designed for use in off road racing only. Racing is a dangerous sport and the fuels involved are highly volatile. Seller is free of responsibility for buyer, user, or installer negligence or accidents and incidents including but not limited to rollovers. Filter and fitting should be checked frequently for cracks, cuts, abrasions, and other signs of damage. Replace filter and fitting at any signs of damage or deterioration. It is highly suggested the user or installer test this item with their fuel and other fluids to ensure safe operation of their equipment. Seller is free of responsibility for misuse or user/installer negligence. Color and design of actual filter media, fittings and hose clamps may vary depending on stock levels. Some components of this product are plastic or rubber, consider this if temperature is an issue.