This sale is for a gallon of satin finish Hot Rod Black Paint (SMR-207) and a quart of activator; which yields 1.25 gallons sprayable. The SMR-207 is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.8 lbs/gallon voc areas like California. SMR-207 Hot Rod Black is a 2 component acrylic urethane coating. It mixes 4:1 with a 5-10% optional reduction with Urethane Grade Reducer. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. GUN SETUP Fluid Tip psi HVLP Spray Gun 1.3 – 1.4mm 8-10 psi Conventional Gravity Feed 1.3 – 1.4mm 25-30 psi SURFACE PREPARATION: Apply SMR-207 Hot Rod Black directly over primer surfacer that has been finish sanded with 400-500 grit sandpaper. APPLICATION Apply 1 full wet coat followed by 1 medium wet coat. Allow 5-10 minutes flash time between coats. Time to recoat Air Dry 24 hours @ 70°F Bake After cool down