Search

Search

Home / HENKYO / Replacement Parts
Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing in Kuwait

Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing

KWD 15.500
Brand
HENKYO
Weight
109 g
– 1 +

Special Features

  • The tool kit is suitable for mechanics who have experience repairing carburetor throttle shafts, not for novices, thank you!
  • Reamer size: knife edge diameter 9.4mm, Knife Shank diameter 7.9mm.Kit includes: 8 pcs Made of solid brass Processing bushings and one carbon steel reverse-cut piloted reamer
  • Brass Bushing Dimensions: Outside diameter 9.45mm,Inside diameter 7.93mm
  • kit can repair most carburetors with 5/16" shafts

Description

kit can repair most carburetors with 5/16" shafts
These include:
Rochester Quadrajet, DualJet and Varajet
Rochester 2G, 2GC, 2GV
Rochester MonoJet and Model B, BC and BV
Holley 2245 and other small Holley 2 barrels
Carter BBD
How to use the kit:
1 Remove the throttle shaft, clean the carburetor Damper blade and throttle shaft
2 Using a hand-held variable speed drill (recommended bit size is 9.2mm, smaller than the actual aluminum hole 0.2mm), drill the aluminum hole of the carburetor throttle shaft
3 Reaming operation using the 5/16" reamer included
4 Insert the front of the brass bushing into the aluminum hole
5 then pass the throttle shaft through the brass bushing
kit can repair most carburetors with 5/16" shafts
These include:
Rochester Quadrajet, DualJet and Varajet
Rochester 2G, 2GC, 2GV
Rochester MonoJet and Model B, BC and BV
Holley 2245 and other small Holley 2 barrels
Carter BBD
How to use the kit:
1 Remove the throttle shaft, clean the carburetor Damper blade and throttle shaft
2 Using a hand-held variable speed drill (recommended bit size is 9.2mm, smaller than the actual aluminum hole 0.2mm), drill the aluminum hole of the carburetor throttle shaft
3 Reaming operation using the 5/16" reamer included
4 Insert the front of the brass bushing into the aluminum hole
5 then pass the throttle shaft through the brass bushing

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}