BATTERY JUMPER CLAMP, EFFECTIVE SOLUTION TO YOUR CAR ON THE ROAD SUDDENLY NO POWER PROBLEM, HELP YOUR CAR EMERGENCY BORROW POWER

Product Information
Clamp Length: 160.00mm/ 6.30 inch
Handle Width: 102.00mm/ 4.02 inch
Collet Width: 25.00mm/ 0.98 inch
Maximum Current: 1000 AMP
Cable Gauge: 2-6 AWG
Input: 12-24 V
Color: Black, Red
Material: PVC, Pure Copper
Packaging: 1* Black Battery Charging Pliers, 1* Red Battery Charging Clamp, 2* Crimp Terminal, 2* Screws, 2* Nuts

Product Features and Functions
Features: Non-slip, electrically conductive, sturdy, durable, good insulation
Functions: Replace, repair damaged pair of connectors on existing jumper cables

How to Remove
Remove the black wire clips from the body or ground of the rescued vehicle
Remove the black wire clip from the rescue vehicle
Remove the red wire clip from the rescue vehicle
Remove the red wire clip from the rescued vehicle

NOTE
1. If you find that the rescued vehicle will not start, check the metal contact parts for poor contact
2. You must also follow the order when removing the wiring, otherwise it will possibly cause a short circuit
3. If you find any electrolyte residue near the battery of the rescued vehicle, please connect the black clamp to the metal casing near the engine of the rescued vehicle
4. It is forbidden to connect the black clamp to the negative terminal where there is electrolyte residue, as sparks and other problems may be generated