AGFRC RC Gyros - Easy Gain Aluminium Cooling Min Gyroscope for RC Car Truck (GY01-CNC)
Specification
Weight: 12g
Dimension: 25.7*24.7*9.5mm
Operating Voltage: 3.7～8.4V
Current Grain: 20mA / 6V
Operating Temperature: -10℃+50℃
Input Signal: PWM (50-333Hz) / SANWA SHR
Output Signal: 1520uS (333Hz)
Control System: PID Control System

Kindly Reminder: For better signal connectivity, it is recommended to use our AGFRC servos together.
Operating Instruction
Dial Switch Setting
SW1: Servo output signal setting: Digital / Analog
Note: Digital signal only for digital servo, if use analog servo, it could damage because of heat.
SW2: Normal/ Reverse setting, change the servo direction.

Signal Input Mode
PWM（50-333Hz）suitable for most of remote control system, while do not plug in the gain wire, the gyro's potentiometer can be used for gain adjustment.
SHR suitable for Sanwa remote control system

Gain Mode
1. Adjust the gain via gain channel of the transmitter , range from -100% ~ 0 ~ +100%.
a. 0 means without gain output.
b. -100% / +100% means maximum gain. While adjust via gain channel, Gyro potentiometer change to gain signal adjustment range, clockwise for maximum.
2. While do not plug in the gain wire, the gyro's potentiometer can be used for gain adjustment.