Description:
This POE injector ethernet adapter is a good solution for you to save you trouble in power cabling and costs by simply connecting your POE or non-POE device with an Ethernet cable. This POE power supply module is compatible with all IEEE802.3af network devices, but it does not have auto-detection function. As long as they are connected, they can directly supply power to network devices.

Specifications:
POE Port: Connect Bridge AP CPE device WAN interface (use with POE separation line)
LAN port: Connect to a router Switch or directly connect to the host computer network interface
DC socket: outside -5.5mm, inside +2.1mm
POE port: 4/5 pin (+), 7/8(-)
LAN port = 1 2 3 6 pin for data
Note: The green terminal and the DC power supply voltage are connected
Line connection equipment to do line standards:
Through 568B; (positive line, direct line, standard 568B: both ends of the line sequence, from left to right line
sequence is: white and orange, Orange, White and green, Blue, White and blue, Green, White and brown, Brown)
Rated voltage (Nominal Voltage): 12-48V DC
Input Current: 0-10A
Input data transmission: 1/2/3/6 pin
Transmission rate: 10/100Mbps
Output Voltage: 12-48V DC
Output data transmission: 1 /2/3/6 pin
Output transmission rate: 10/100Mbps
Output transmission power: 4/5 positive electrode 7/8 negative electrode
Port quantity: 4, 8 (optional)

Package List:
1 * 4/8 Channel POE Power Supply Module POE Injector Ethernet Adapter (Based on your choice)