Feature:
1. LCD Display: Motor controller LCD screen is with backlight, able to display working time, speed percentage. Current mode, forward and reverse rotation status.
2. Easy to Read: Motor controller is with upper and lower speed limit setting, using digital display panel design, easy to read, easy to set speed adjustment.
3. Two Modes: The motor controller has two modes of manual and automatic, the automatic mode is fully automatic forward and reverse rotation within the set time.
4. Speed Time: DC motor controller can set the DC motor slow start and stop time, adjusting speed time, reduce the mechanical stress of the motor and shaft.
5. Touch Switch: The speed governor switches forward and reverse rotation by switch, pointing acceleration and deceleration.
6. Stable Performance: The governor can set the total working time, the time to the point of stopping the rotation, easy to use, small size, beautiful appearance, stable performance.

Specification:
Item Type: DC Motor Speed Controller
Material: ABS
Input Voltage: DC10-55V
Output Voltage: Linear under load
Instantaneous Current: 40A
Continuous Current: Within 30A
Type of Speed Regulation: Current regulation
Speed Regulation Mode: Pointing
Wireless Rocking Control: No support
Timer: Yes
Slow Start Slow Stop: Settable
Speed Digital Display: 0-100 percentage table
Speed Range: 0 to 100 percent
Control Frequency: 15KHZ
Wiring Type: Fence type terminals
Support Motor: Brush motor
Panel Opening Size: Approx. 110 x 70mm / 4.33 x 2.76in(LxW)
Rotational Speed Digital Display: Percentage 0-100

How to Use:
The 10 Function Settings Are As Following:
Manual Auto Mode Selection, Function 0: 1 for manual mode 2 for auto mode The default is 1 for manual mode.
Slow Start Time Setting, Function 1: 000 ‑ 100 The slow start to 100percent speed time is adjusting between 0 and 10 seconds The default is 1