It is a multi-functional front panel with 2 USB2.0 interface, one mic and one audio plug
You can use this device to directly convert the USB 9pin interface and audio on the board into 2 USB2.0 interfaces, headphone output and microphone interface, and install them in an idle floppy drive position. This provides a front USB interface and audio interface, Very convenient
Hardware requirements: a motherboard or adapter card with 9PIN interface and HD-AUDIO audio support, and a chassis with free floppy drive
Product size: floppy drive bit 102mm*25mm
Packing accessories: Floppy drive bit panel*1; DuPont line 9PIN-9PIN*1; Audio line 9PIN-9PIN*1; Fixing screw*5
Description
Manual measurement, with small error. Please check size in detail before purchase.
Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.