Self adhesive
Self adhesive back glue design with good sealing, when removed, the caulk tape leaves no trace or residue behind.
Waterproof and oil-proof
Adds a barrier to water infiltration. Smooth surface, reduce stains attached, easy to clean.
Sealed and beautiful
Keep your house tidy as new one for a long time. Specially designed for family.
Free Cutting
The material is soft and easy to cut, Cut freely to meet your needs.

Note:
1. the parts to be sealed firstly and keep them dry;
2. Before use, firstly measure the length dimension of the required sealing part accurately;
3. Take out the product, measure the same length of the waterproof strip and the sealed part again and cut it;
4. Firstly peel off the 5cm length of the adhesive tape on the back of the product and fold it to 90°, and then fix the waterproof strip on the surface to be pasted; continue to peel the adhesive tape until all installations are completed;
5. When the product is pasted at a 90° turn, cut each side of into a 45° mating interface.
6. The temperature range of the installation room is preferably around 25, if the temperature is too low, the adhesive can be pasted after heating the adhesive with a hair dryer;
7. After the product is pasted, it will be pressed hard to make it stick more firmly;
8. After the product is pasted, do not mix with water within 24 hours and keep it dry.