Search

Search

Home / Crux / Vehicle Electronics Accessories
-8%
CRUX Interfacing DKVW-52 | Radio Replacement with Steering Wheel Control Retention and Dash Kit for Select VW Vehicles in Kuwait CRUX Interfacing DKVW-52 | Radio Replacement with Steering Wheel Control Retention and Dash Kit for Select VW Vehicles in Kuwait CRUX Interfacing DKVW-52 | Radio Replacement with Steering Wheel Control Retention and Dash Kit for Select VW Vehicles in Kuwait CRUX Interfacing DKVW-52 | Radio Replacement with Steering Wheel Control Retention and Dash Kit for Select VW Vehicles in Kuwait

CRUX Interfacing DKVW-52 | Radio Replacement with Steering Wheel Control Retention and Dash Kit for Select VW Vehicles

KWD 45.500
Brand
Crux
Weight
181 g
– 1 +

Special Features

  • PRODUCT FEATURES: Retains factory features in select Volkswagen vehicles while functioning with an aftermarket radio.
  • Supports amplified and non-amplified systems. Includes Single Din/Iso with pocket or Double Din Dash kit
  • EIA color coded wiring for easy installation.
  • "Volkswagen: 2012 – 2013 Beetle, 2009 – 2013 CC, 2007 - 2012 EOS, 2006 – 2013 GTI, 2006 – 2013 Jetta, 2008 – 2013 Golf, 2006 – 2013 Passat, 2006 – 2009 Rabbit, 2009 – 2014 Tiguan, 2009 – 2010 Touareg, "
  • Notes: 1). Driver information display will show the last information that was shown prior to removing the factory radio. 2). The interface does not retain the factory Bluetooth or Sirius Satellite Radio. 3). The radio is designed to shut off when the key is removed. 4). 2010 & Up vehicles with a premium sound system do not retain the RAP feature.

Description

The CRUX DKVW-52 is a premium interface for select Volkswagen CAN BUS Vehicles which includes both a Single Din/Iso with pocket dash kit or a Double Din Dash Kit. The DKVW-52 interface ensures that you can keep the steering wheel audio controls and the factory amplifier (if present) in your Volkswagen when you replace the factory radio. Once you connect this interface to the wires on your new stereo's wiring harness, you've covered the power, ground, and factory speaker connections for your new stereo. The DKVW-52 interface also offers the reverse, illumination, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. The Crux interface is designed to work with the factory Volkswagen CAN-bus systems.
DASH KIT ASSEMBLY DIAGRAM
DOUBLE DIN INSTALLATION
1. Remove the left and right pocket support tabs.
2.Attach the left and right (DDMB) Double din mounting bracket to the mounting frame.
3. Remove the center pocket bracket on the mounting frame.
4. Insert the (DDTR) double din trim ring into the mounting frame. 5. Insert the aftermarket radio and adjust to desired fit and tighten screws.
SINGLE DIN INSTALLATION
1. Attach the left and right (DDMB) Double din mounting bracket to the mounting frame.
2. Insert pocket into lower section of the mounting frame.
3. Screw the left and right (DDMB) Double din mounting bracket to the rear of the pocket with provided screws.
4. Insert radio sleeve into upper scetion of mounting frame. 5. Insert the aftermarket radio and adjust to desired fit.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}