Before use, please read the instructions carefully and pay attention to the battery installation.

Simple Operation:
1. Place the fabric to be sewn under the fastening plate. If the needle arm of the portable sewing machine is too low, you can turn the wheel to raise the needle arm.

2. When sewing, move the fabric to the left. Press the handheld sewing machine on/off button to start stitching. Release the switch button to stop the stitching.

3. Turn the wheel to raise the needle arm of the sewing machine and take out the fabric. If the sewing thread is still hooked to the sewing machine, please do not pull it out directly. You need to lift the fabric and move it slowly left and right until the sewing thread falls off.

4. Cut the sewing thread and tie the knot, done.

Please attention:
1.Please don't mix the battery with different brand or mix the battery with old and new.

2.Pay attention to the orientation of the positive and negative terminals when inserting the battery.

3.The correct sewing thickness must not exceed 1.8 mm. Do not sew material that is too large, too hard, or too soft.

4. When the sewing machine fails to start because of the temporary rotation of the cloth, please turn the button on the side of the machine to rotate it arbitrarily, and click the switch until it can run.

5. Tension Control: Don't be too tight, otherwise, the thread will get stuck.

6. This is a single-thread sewing machine, which needs to be knotted after sewing, otherwise, the thread will drop slightly. Threader can help you knot.