Parameter Information:
Input Voltage: 5V
Output Voltage: Max 4.2V
Operating Temperature: -10 - 85 Degree Celsius
Input Voltage: 5V
Charging Cut-off Voltage: 4.2V(+/- 1 Percent)
Charging Current: 1000mA
Battery Protection Voltage: 2.5V
Battery Protection Current: 3A
Place of Application:
- Single lithium battery or multiple parallel lithium battery charging.
Note:
- Reverse connection of the output end (battery end) will burn the chip.
- When the first time you access the battery, there may be no voltage output between OUT- and OUT +, at this time, get access to the 5V voltage, it will be activated.
- When the battery was get out from B + and B-, it still need to be charged then can be activated.
- If you want to use Phone charger to charge, the current input should be up to 1A and more, otherwise it can not be in normal charged.
- Connect the battery to the B + and B-, insert the phone charger into the USB female, red light means being charged, the green light means full charged.
Package Include:
15 x TP4056 Lithium Battery Charger Module