Search

Search

Home / HIPICCO / Bearings, Balls & Bushings
Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller in Kuwait Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller in Kuwait Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller in Kuwait Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller in Kuwait Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller in Kuwait

Drawn Cup Needle Roller Bearings, 10pcs HK121610 Open End Caged Bearing, 12mm Bore, 16mm OD, 10mm Width ST14 Steel Single Row Roller

KWD 3.500
Brand
HIPICCO
Weight
61 g
– 1 +

Special Features

  • [Model] - HK121610 (Bore Dia. (Fw)= 12mm, Outer Dia. (D)a= 16mm, Width (C)= 10mm)
  • [MATERIAL] - ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Roller, high load carrying capacity and stiffness, good heat tolerance.
  • [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Pre-Lubricated. Good running properties; Low cross section, enable downsizing and suit for use in restricted mounting spaces.
  • [CAPABILITY] - Dynamic Load Rating (Cr): 4150N; Static Load Rating (Cor): 5800N; Limiting Speed (Oil): 19000rpm
  • [APPLICATION] - Needle bearings are used in automobile components such as rocker arm pivots, pumps, compressors, and transmissions, also used for office equipment, paper-towel dispensers, exercise equipment, appliances and two-speed gearboxes.

Description

Specification:
Model: HK121610
Drawn Cup Material: ST14 Steel
Cage Material: ST13 Steel
Needle Roller Material: Chromium Steel (GCr15)
Bore Diameter (Fw): 12mm
Outside Diameter (D): 16mm
Width: 10mm
Static Load Capacity (Cor): 5800N
Dynamic Load Capacity (Cr): 4150N
Maximum Rotational Speed (Oil): 19000rpm
Number of Packs: 10 Pcs
Description:
Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
For various applications such as planetary gears in automobiles, constant mesh gearboxes, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
NOTE:
Install with a press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}