The guitar humidifier is made of ABS and high-density sponge for durability. This guitar humidifier has a novel appearance and is suitable to match your favorite guitar.
How to use: Soak a high-density absorbent sponge in water for a few minutes to saturate the sponge with absorbent water, and the sponge becomes completely soft from hard. Remove the sponge from the water and slightly squeeze the excess water out of the sponge so that it does not drip, then place it in the humidifier chamber.
Maintenance: After the humidifier stands for a period of time, the sponge will become hard after the moisture in it evaporates. In this case, take out the sponge and wet it again before continuing to use.
Stretch the two strings of a guitar and place the humidifier between the two strings until the string is stuck on the bump at the top of the humidifier. Guitar humidifier design has 30 holes, can make the guitar even moisture, farewell to dry guitar cracking problem.
Tips: The appropriate humidity range for guitar storage is about 40% to 60%. If conditions permit, use a hygrometer to measure the ambient humidity. If the humidity is lower than 40%, use this product to humidify your beloved guitar. If the humidity is higher than 60%, do not use a humidifier for the guitar.