This unique product is the most versatile locking unit available; it will accommodate 6 different hole spacing patterns, from 3 inch, 3-1/2 inch, 3-15/16 inch, 4-15/16 inch, 5-5/8 inch and 6-7/8 inch. The 3-15/16 inch hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. Both the 3 inch and 3-1/2 inch on center mounting holes are not machince thread tapped, all others are. These holes are offset 1/8 inch from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets. The plug has been pre-punched out. Installation note: Trim the tailpiece of the lock if your key sticks and is hard to remove or turn in the lock.
This sliding door outside pull is constructed from die cast and comes finished in white. It features a multi-mounting hole pattern with a key cylinder. It is non handed and the tail piece is notched for various break-off lengths.