UL Certified Charger for 36V Max 42V Lithium battery
Please check the Connector and voltage of your battery before purchase.
**Inspect the temperature of your battery the first time use this charger**

INPUT: 100-240VAC,50/60Hz
OUTPUT: CC-CV mode, 42V max, 2Amp max.
Connector: for 8mm-9mm(3.0inch-3.3inch) 3 prongPolarity：pin 1：Positive，pin 2：Negative

Case: Fireproof ABS friendly to the environment
Packing:42V 2A battery charger*1, Power cord(US Plug)*1
Red light means charging. Green light means full charged or disconnected.

This charger is Specially designed for 10S 36V Li-ion battery.
It is optimized to improve the cycle life of your battery according to the chemistry of the battery.
Save your time by fast charge with high current.
6 protections to ensure the safety.
Automatically stop when the battery is full charged.
High reliability, long life span, High efficiency, light weight.

Don't use for batteries with safety problems.
Used for 10S 36V Lithium battery only.

Don't use if your battery connector or polarity don't fit.
Don't use when the environment is wet.
Isn't E-mobility device accessory. Don't use as E-mobility charger.
Cut-off the AC when the battery is full charged.
Don't charge when the battery is broken.
18 months warranty . Feel free to let us know if you have any problem.

FAQ
Q: What to do when a charger is being used for the first time?
A: Inspect the temperature of battery. Stop charging if it is too hot.

Q: What to do when charger gets GREEN but never turns RED?
A: ①Check if the battery is well connected to charger.
②Check if the voltage of the charger fits your battery.
③Check if there's anything wrong with your battery.

Q: What to do when LED never turns on or has any other issues?
A: Please contact Wyness support.