LBTbate 100% new for epson ELPLP91/V13H010L91 replacement Projector lamp bulb with same functioning as your original one, long life replacement projector lamp. bulb installed in your projector, so you appreciate the effect of the original Projector lamp.
Please Note:
Before purchaseplease make sure that this projector lamp/bulb is compatible with your projector. If you do not find your projector model on the page, contact us to confirm.
About Product:
LBTbate has own factory and many experienced workers.Every lamp lamp will be test before leaving factory. So you don't need to doubt the quality. and we can solve any after-sales problems and guide the installation.
Installation Step:
1.Turn off the projector and disconnect the power cord.
2.Let the projector cool for at least 30 minutes.
3.Use a screwdriver to remove the screw from the cover.
4.Remove the cover and the lamp protection film.
5.Loose the screws of the lamp.
6.Pull our the lamp module by lifting the handle.
7.Replace the new lamp, then tighten back the screws.
8.Reinstall the lamp cover and reset the lamp usage time.
Tips:
1). Make sure the conditions of the room is clean and ventilation.
2). Change or clean your projector air filter monthly.
3). Better let your projector rest for 15minutes per 4 hours running.
4). Do not unplug the power line before the cooling fan stop working.
COMPATIBLE MODELS - Ctrl+F to find your model For Epson ELPLP91/V13H010L91 PowerLite Home Cinema 680 685W BrightLink 685Wi 695Wi EB-680 EB-680S EB-685W EB-685Wi EB-685WS EB-695Wi Replacement Projector Lamp Bulb