Dashtop LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 2/4/8 Way LED Joystick + 20x LED Illuminated Push Buttons for Mame Windows System & Raspberry Pi Projece Arcade Project Red + Blue Kits
This is a LED Arcade Game DIY Parts for 2 Player DIY Project.
The encoder support all the windows systems!
Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!
The Joystick is a 2/4/8 way professional LED joystick!
The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.
The color of the control board may vary depending on the production lot.
Attention:
1: Please read out user manual carefully before start your DIY projects.
2: Please swap the positive and negative wires for the led lamps if the led not illuminated.
What's inside the package?
2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
2 x 2Pin Wire provide 5V voltage for the LED Joystick
4x 24mm Ring-Fixing LED Push Buttons as start buttons
16x 30mm Ring-Fixing LED Push Buttons as fight buttons
2x 5Pin 2/4/8 way joystick
1x Install Description