Product Support:XGecu T56 Programmer support for Nor Flash / NAND Flash / EMMC TSOP48 / TSOP56 / BGA48 / BGA63 / BGA64 / BGA100 / BGA153 / BGA162 / BGA169 / BGA2222 / BGA222222 / BGA22222 1.24. 25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, Flash memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc. NAND EMMC supports maximum capacity up to 256G.
Support Lower Voltage Chips:T56 programmer can directly support a minimum of 1.20V programming voltage, some non-technical sellers configure the T56 programmer with a 1.8V adapter, It don't need extra adapter
Product Introduction:T56 programmer parameters (1). 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB 2.0 HS 480MHz transmission (2). 56-pin powerful pindrivers IO design. All pins have a maximum operating frequency of 50 MHz and high reliability. (3) Stable and reliable 8-pin in-circuit programming ISP interface, the wire length is more than 30 cm, and it can communicate reliably at 25 MHZ. 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ.
Note: before you buy ,you can download the software or contact us to check the programmer whether support the chip typle,which adapter it need, then choose the adapter kit you need,thanks
-21%
MORIENZI DFN8 QFN8 chip 6 * 8 WSON8 Probe line Read Write chip Circuit Programming 1.27 for USB Programmer EZP2019 EZP2023 Xgecu TL866II T56 T48 RT809F RT809H
KWD 11
Xgecu T48 Programmer 19 Adapter t48 eprom Programmer Xgecu TL866II Plus Upgraded Reader Writer TL866-3G IC Bios AVR MCU SPI Nor NAND Flash EMMC Clip Socket
KWD 38
MORIENZI SOP44 to DIP44 Adapter IC Programmer Test Burn-in Socket 1.27mm Pitch for SOP44 SO44 SOIC44 Package Xgecu T56 RT809H
KWD 7
DFN8 QFN8 WSON8 chip Clip Probe line 5 * 6mm Read Write chip Circuit Programming 1.27 for USB Programmer EZP2019 EZP2023 Xgecu TL866II T56 T48 RT809F RT809H
KWD 14
