HOW TO USE:

1. Inflate the tub ( please inflate about 80% -85% ) and thoroughly cover the nozzle.

2. Set the hot water temperature to room temperature (37 to 40 degrees Celsius).

3. After using, please drain the tub through the drain hole on the bottom of the tub, clean it and then put it in a well ventilated place to dry.

NOTE:

1. Please not pour boiled water into the bathtub directly. Pour cold water first, then pour hot water until water temperature is suitable for a bath.

2. If it is the first time you use it, please not inflate too much air into the bathtub, and wait the product adapt the inflated environment about 2 hours, then you could use it. This step could longer the lifetime of product. Later, you could inflate more air if needed and could use it directly, no need to wait. Generally, filling air regularly every 3 to 5 days.

3. As the temperature drops, the material of the inflatable product will harden. Please be sure to place the product in a warm room for 24-48 hours after receiving the product (small products can be soaked in warm water), and wait for the material to soften before inflating In order to prevent the material from becoming brittle and hard due to low temperature, and accidentally damaged under the effect of external force, air leakage in this case cannot be returned and repaired.

PACKING LIST:

1 * Bathtub

1 * Inflation pump

Thank you for purchasing in our store! If need any help, pls contact us freely. We will find a best solution for you!!