High Quality: This water meter is made of the brass whcih resistant to corrosion and condensation deposits. The instrument cover is made of brass and the bearing elements are made of high-quality steel, wear-resistant synthetic stones and other elements made of plastics.
Conpatibility: This DN 20 water meter is equipped with 3/4" NPT couplings. This helps you install better.
Accessaries: 2pieces of brass nut ;2 brass connecting pipe; 2pieces of washers and 2 sealing caps
Accuracy: Conforms to ISO 4064, for clean water only. Maximum Normal Flow Rate: 10 GPM, Minimum Flow Rate: 0.25 GPM.
Note: Please note that this water meter measures in cubic meters, not gallons. 1 cubic meter is approximately equal to 264 gallons. Thanks for your understanding.
MICRO ESSENTIAL LABS pHYDRION VIVID PH PAPER 6-8 PH 15 FT ROLL WITH COLOR CHART
KWD 4.500
Electrode Extender Conductive Adhesive Gel by PMT – Enhance Durability, Adhesion and Conductivity for TENS/EMS Electrodes; Extend Life of Electrodes and Increase Adhesion – 3.5oz
KWD 7
GLTL Slurry Test Kit,Mud Hydrometer,Mud Viscometer,Marsh Funnel and Viscosity Cup
KWD 64
9800 Plastic pH Test Strips, 0.0 - 14.0 pH 1 Vial of 100 strips
KWD 9
