OEM Part Numbers: LR072318 LR013699 LR032104 LR023622 Fit For the Following Models: Compatible with Land Rover DISCOVERY IV (L319) 2.7 TD 4x4 2009-2018 Compatible with Land Rover DISCOVERY IV (L319) 3.0 4x4 2013-2018 Compatible with Land Rover DISCOVERY IV (L319) 3.0 SDV6 SE 4x4 2009-2018 Compatible with Land Rover DISCOVERY IV (L319) 3.0 TD 4x4 2009-2018 Compatible with Land Rover DISCOVERY IV (L319) 3.0 TD HSE SDV6 RAW 4x4 2010-2018 Compatible with Land Rover DISCOVERY IV (L319) 4.0 V6 HSE 4x4 2009-2018 Compatible with Land Rover DISCOVERY IV VAN (L319) 3.0 TD 4x4 2011-2017 ♥ Note: Please confirm that the model, part number, and photo are consistent with yours before placing an order. If you have any questions, please send us your VIN code and we will check it for you.In addition, we also sell other motor parts. If you need anything, please provide us with the part number, OEM number, chassis number, or model, series, and year. This is the best way to confirm what you need and save your time. We recommend that you install it professionally When you are not familiar with it. Please be careful when installing and testing, otherwise it will cause damage to the parts. HANDBRAKE INSTALLATION PROCEDURE: 1.Assess the extent of wear on the handbrake cover. If significant wear is observed, it is advisable to replace the handbrake cover first. (Note: The handbrake cover, not the foot brake cover) 2.Proceed with installing the handbrake cable and adjust the clearance between the handbrake and brake drum to its minimum. 3.Connect the computer plug, open the phone key door, and verify if the electronic handbrake module functions properly (the second and third steps must not be reversed). 4.Once confirmed that the electronic handbrake module operates normally, proceed with installing the emergency unlocking line.