Stainless Steel Tensioner Tool Cutting Fastening Hand Guided Banding Tool

Ratchet Design
Ratchet tension design,make work more effective and labor saving.

Easy Operate
Stainless steel cable tensioning is more easy to operate.

Cut-off Function
AIWFL stainless steel cable tie gun come with cable cut off function.

Application:
This banding tool has high quality corrosion resistance, abrasion resistance, good fire resistance,which is not easy to rust, and has long service life.

How to Use:
Step 1
Pass one of the strap through the buckle and reserve 5cm.
Step 2
Bend the reserved steel strap.
Step 3
Put strap belt on the tube and insert the strap into buckle.
Step 4
Banding tool clamps the strap, pull down the handle and tighten, adjust the appropriate tightness.
Step 5
Turn the banding tool to the two corners close to the buckle, pull down the blade handle to cut the steel strap.
Step 6
Hammer the two corners of the buckle and completed installation.

Specification:
Material:Steel
Applicable Width:0.18-0.98inch(4.6-25mm)
Applicable Thickness:0.01-0.047inch(0.25-1.2mm)
Effective Tension:2400N
Application:Manual Packing
Height:77mm/3.03inch
Length:235mm/9.25inch